600 Lathes England COLCHESTER MULTITURN 3000, CNC Lathe, Fanuc (year 2005)

Z axis needs to repair

Specification Colchester MultiTurn 3000

Height of centres 230mm

Distance between centre 1500mm & 2000mm

Swing over bed 460mm

Swing in gap 730mm

Gap width from faceplate 216mm

Swing over cross slide 270mm

Spindle bore 78mm

Spindle nose Camlock D1-8

Spindle centre height from floor 1145mm

Taper in nose bush No. 5 MT

Spindle speed ranges

(1 to 247 rpm) (1 to 740 rpm) (1 to 2200 rpm)

Speed Motor S3-40% 11kW

Constant power range 71 – 2200 (7.5kW)

X-Axis working stroke

296mm

X-Axis Thrust (@ stall torque) 5.97kN

X Axis Programmed rapid traverse rate (G00) 8m/min

X-Axis Manual mode traverse rate (jog) 3m/min

X-Axis CNC rapid traverse rate (jog) 2m/min

X-Axis maximum programmed feedrate 7750mm/min

Z-Axis working stroke 1530mm

Z-Axis Thrust (@ stall torque) 12.53kN

Z-Axis Programmed rapid traverse rate (G00) 10m/min

Z-Axis Manual mode traverse rate (jog) 6m/min

Z-Axis CNC rapid traverse rate (jog) 2m/min

Z-Axis maximum programmed feedrate 7750mm/min

Types of thread

Metric / Imperial / Diametral / Module

Width over bed ways 400mm

Width of cross slide 204mm

Cross slide travel 310mm

Tailstock quill diameter 95mm

Tailstock quill travel 145mm

Tailstock quill taper No. 6 MT

Standard electrics 400V AC + 10%/-15% 50/60Hz

Electrical supply required 15kVA

Colchester MultiTurn 3000

Condtion: good, funtional, but Z axis is noisy, tailstock needs repair

working still in operation, but are parts to repair:

Control system: FANUC

Holders and accessories - yes

Suction and filter - yes

Dismantling and loading is no in price