Arburg 630 S 2500-1300, 275 ton (2001)
Specifications
Manufacturer | Arburg |
Model | 630 S 2500-1300 |
Year | 2001 |
Condition | Repair required |
Stock Number | 00078 |
Clamping force | 275 ton |
Screw diameter | 60 mm |
Description
Condition: requires small repairs. Machine was good, but can not be tested, is not under power (was working in working process until 09/2022) the machine was replaced by a new machine and is already moved out, it is covered outside
-There is an oil leak in the ejector compartment (there is defect – that is needed to replace the ejector seal – the owner of machine bought for it - A set of new gaskets is included. But never was done – must do buyer)
-Maybe need to reload the system
-Maybe need to reload tonnage expansion - is industrial flash available
Clamping force: 275 ton (clamp force increased by 10%)
Intrusion function, extension of closing force to 275 tons
Screw 60 mm, highly wear-resistant
Tie bar distance 630x630 mm
Injection unit 1300
open nozzle 60 mm
clamping platen set 630 central, 160 mm centr. dia.
Connection for air blow unit 1
1st core-pull, simult. movem. man. adjust. holding press.
inj.press. incrased by 10%
closing force 110 kN
daylight 900-1300 max. mm
platen size 900x900 mm
injection volum 664 cm3
shot weight 607 max g PS
2 hydraulic core pullers
2 x cavity pressure monitoring, 6 x system controlled hot inlet.
documentation - yes
weight 14000 kg
no robot (euromap 12-67)
free loaded to truck
Machine has only 4000 hours of pump!