Krauss Maffei KM650-4300 GX (2013)

Machine KraussMaffei KM650-4300 GX

Clamping force kN: 6500

Clearance between tie bars ( h x v ) mm: 1110 x 960

Mould opening stroke mm: 1450

Mould height min. mm: 450

Mould height may. mm: 1000

Ejector stroke mm: 250

Screw diameter mm: 90 (mixing HPS-M)

L/D ratio: 20

Injection pressure bar: 1839

Stroke volume cm3: 2290

Control version: MC5

Screen text: Germany

Condition: Checked, ready to work

Equipment:

- Anti-vibration levelling pads

- BluePower - Servo pump drive for lower energy consumption

- Wear resistant plasticizer, surcharge

- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption

- 2 x pneumatic valve on moving platen for blow function

- 2 x pneumatic valve on fixed platen for blow function

- Pneumatic cascade control, 4-fold for hotrunner

- Hydraulic cascade control, 4-fold for hotrunner

- Conveyor control

- Mechanical robot interface according to EUROMAP 18

- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts

- Hydraulic core pull system 2-fold on moving platen

- Hydraulic core pull system 2-fold on fixed platen

- Pneumatic core pull system 1-fold on moving platen

- Pneumatic core pull system 1-fold on fixed platen

- Pressure relief for hydraulic core pulls

- Pressure relief for hydraulic cascade valves

- 20 hotrunner control circuits

- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A)

- Potential-free contact for signal "plasticizing" on socket HAN 3 A

- Switch over to holding pressure depending on cavity pressure (Kistler)

- Quality statistics

- Chip card reading unit

- Graph display and analysis package with 10 graphs

- Trend graphics

- PV-closed loop control

- Interface for production data consisting of 5 potential free contacts inside the control cabinet

- 3 free programmable in- and outputs in the control cabinet:

KraussMaffei Linear Robot LRX 350:

- Fully integrated control

- Horizontal stroke: 4000 mm

- Vertical stroke (telescopic): 2000 mm

- Demolding stroke: 1200 mm

- Maximum payload: 35 kg