Krauss Maffei 1300-8100MX (2016) low hours, removable tie bar

KRAUSSMAFFEI KM 1300 MX – SP 8100

Screw Ø105 mm

CLAMPING UNIT

• Clamping force: 13,000 kN / 1,300 t

• Mold opening force: 910 kN

• Moving platen force (open/close): 159 / 153 kN

• Platen dimensions: 2,150 × 1,910 mm

• Tie bar distance (H × V): 1,550 × 1,250 mm

• Opening stroke: 2,350 mm

• Mold height (min./max.): 700 / 1,400 mm

• Maximum daylight: 3,050 mm

• Ejector stroke: 350 mm

• Ejector force (forward/backward): 250 / 125 kN

• Optional mold height (min./max.): 950 / 1,650 mm

• Daylight with increased mold height: 3,300 mm

INJECTION UNIT – SP 8100

• Screw diameter: 105 mm

• L/D ratio: 23

• Max. injection pressure: 1,778 bar

• Stroke volume: 4,546 cm³

• Shot weight (PS): 4,137 g

• Injection flow rate: 805 cm³/s

• Screw speed (nominal/max.): 126 / 159 rpm

• Plasticizing rate PS (nominal/max.): 147 / 187 g/s

• Plasticizing rate PE (nominal/max.): 116 / 147 g/s

• Nozzle contact force: 166 kN

ELECTRO-HYDRAULIC EQUIPMENT

• Pump motor power: 110 kW

• Installed heating capacity: 59 kW

• Barrel heating zones: 7

• Dry cycle rate (Euromap 6): 761 cycles/h

• Dry cycle time (Euromap 6): 4.7 s

• Oil tank capacity: 1,500 l

DIMENSIONS & WEIGHT

• Net weight incl. cabinet: 77 t

• Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m

• Maximum mold weight: 29,000 kg

ELECTRIC SCREW DRIVE

• Screw drive power: 117 kW

• Screw speed (nominal/max.): 123 / 193 rpm

• Plasticizing rate PS (nominal/max.): 144 / 226 g/s

• Plasticizing rate PE (nominal/max.): 114 / 178 g/s

ACCUMULATOR (ZE)

• Injection flow rate: 1,732 cm³/s

EQUIPMENT

• Removable tie bar (retractable tie bar)

• Euromap 67 – robot interface

• 48 hot runner controllers

• 8 pneumatic cascades

• 6 hydraulic cascades

• 2+2 cores

• MC6 control panel

PROCESSED MATERIALS

• PP, PC