Arburg 320C 500-170 (2015) golden edition

Arburg 320 C 500-170 (2015) Golden edition

Working hours : 40.167 h

Clamping force: 50 t

Screw diameter : 30 mm

Clamping force: 500 kN

Distance between tie bars: 320 × 320 mm

Platen size (H × V): 446 × 446 mm

Minimum mould height: 200 mm

Maximum daylight opening: 550 mm

Ejector stroke: 125 mm

Screw diameter: 30 mm

Maximum shot volume: 85 cm³

Maximum shot weight (PS): 77 g

Injection pressure: 2000 bar

Screw speed max: 400 r/min

Nozzle stroke: 250 mm

Nozzle contact pressure: 40.6 kN

Heating capacity: 9.4 kW

Pump drive power: 11 kW

Total installed power: approx. 20.5 kW

Machine length: approx. 3.4 m

Machine width: approx. 1.4 m

Machine height: approx. 2.0 m

Machine weight: approx. 2 400 kg

2 pumps machine

Machine Equipment / Configuration

Control system: Selogica Direct controller

Hydraulic system: Dual-pump hydraulic system

Injection Unit

Thermoplastics injection unit, 30 mm screw, high wear resistant design

Standard screw coupling with flat-ended geometry

Open nozzle, 30 mm

Nozzle tip for open nozzle

Heater band for open nozzle

Clamping Unit

Mounting platen set, central diameter 125 mm

Core pull 1, for serial movement, holding pressure via check valve

Interfaces & Connectivity

Robot interface EUROMAP 67 (50-pin)

Interface for electrical safety interlock on safety door EUROMAP 73